-
Product Information
Stone Coats Epoxy Undercoat: The Ultimate Solution for Epoxy Countertops
Discover our specially formulated product that revolutionizes epoxy countertops. Our high bond, ammonia-free paint is perfect for coloring the substrate when pouring epoxy countertops, table tops, and more. With Stone Coat Epoxy Undercoat, no more waiting for ammonia to dissipate - unlike other latex under paint colors at hardware stores. Experience the convenience and quality you deserve. Start your project with Stone Coats Epoxy Undercoat today! For optimal results, apply Stone Coat Epoxy Undercoat on porous materials like MDF, particle board, and plywood. Upgrade your old countertops with Stone Coat Epoxy by applying two thin coats of our Bonding Primer for the best adhesion and outcome.
Product Features:
- High bond
- Ammonia-free
- Low odor
- Quick drying
- Compatible over many surfaces
Quick Guide Instructions:
Surface Preparation - If you're applying over your old countertop surface and it has been prepared with our Bonding Primer & Sealer, lightly sand with 220 grit and wipe off the dust before applying. If you're making new countertops out of MDF or sanded plywood, no need to sand before applying Epoxy Undercoat
Application - Sir thoroughly before use. To remove the plastic lid to minimize leakage, slightly warm with a heat gun and pull up on white plastic on the can. Apply a uniform, thin coat to your project using a roller of your choice. It's important to let the first coat fully dry before applying the second. Allow the second coat to dry a minimum of 4 hours before moving on to the epoxy coating.
Clean up - Remove all paint splatters and wash all rollers, frames and paint pans with warm soapy water
Size: 1 quart (32 oz.)
Coverage: 40-50 square feet Two thin coats.
Colors: White & Black (Combining white and black creates a custom shade of gray.)